I agree.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Swettysblazer's 1991 K5 Trazer: ONE TONS!
- Thread starter swettysblazer
- Start date
I agree.
Cage designs 
Get it going...
Just a thought promoter. I've always liked the look of this one.
Little too open for me... I wanna keep it a driver.
Por 15 ....... keep it off the hootus.
So going trazer then. Here's my ideas to keep it nice.
Ditch the rockers. Weld in tube for sliders. Also make it a unibody. Sliders welded to the cab and mounted on the frame. 3 big reasons for this. Maximum clearance. Gives a great mounting spot for a hoop behind the cab. Makes the frame less wet noodle. Cause your adding a whole extra framework.
I would add steel, say 1/8 right behind the door. Get your hoop close enough and no need to go around the corner.
The front fenders are much harder to protect. If you wanna keep em just get spares
So going trazer then. Here's my ideas to keep it nice.
Ditch the rockers. Weld in tube for sliders. Also make it a unibody. Sliders welded to the cab and mounted on the frame. 3 big reasons for this. Maximum clearance. Gives a great mounting spot for a hoop behind the cab. Makes the frame less wet noodle. Cause your adding a whole extra framework.
I would add steel, say 1/8 right behind the door. Get your hoop close enough and no need to go around the corner.
The front fenders are much harder to protect. If you wanna keep em just get spares
Eric,that's almost exactly what I was thinking for the sliders.... Thanks.
Yeah, its shot.
That's what she said
Too bad
I'm ready to see this.
Zip tie body back together
couple street signs and some self tapping screws should fix her up
Nobody is going to get seriously into it until you get the damn saws all out 
I've been in it from the beginning. I have no stipulations other than....
