B
Bent77
Guest
Yup. As in sanded out some rust and went to town. It looks rattle canned
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Ah, I thought you were changing colors on us.
B
Bent77
Guest
Nah, maintenance paint. Theres enough tree pinstriping that its not worth making too much effort
Oh, I am fully aware of that haha.
B
Bent77
Guest
Yeah, point and fog.
Sometimes a guy gets lucky and the 20% more cans are on sale!
Sometimes a guy gets lucky and the 20% more cans are on sale!
I was stupid and bed linered my whole truck. It did ok for a bit, but even spray on liner doesn't last very long. And, it's not easily touched up.
B
Bent77
Guest
Yeah I've seen a few of those chunked off, which kinda sucks.
I will likely do the inside of the bed, maybe next summer.
Also planning hydro assist and a new rear shock setup pre BB17.
Hopefully you can Moab with us sometime
I will likely do the inside of the bed, maybe next summer.
Also planning hydro assist and a new rear shock setup pre BB17.
Hopefully you can Moab with us sometime
I have to. I have no choice. It's ingrained in me. I bleed for traveling and wheeling.
B
Bent77
Guest
Pretty decent drive for you, but its worth it.
Ever do Moab?
Ha, I've never wheeled outside Kansas or Oklahoma. But that will change as soon as my toe rig gets done, and I get a camper for it.
But this is your thread. What's left on the list that "has" to be done for BB16?
But this is your thread. What's left on the list that "has" to be done for BB16?
B
Bent77
Guest
This is my working list
Only the limit strap and tank cap gaskets are "needed"
Only the limit strap and tank cap gaskets are "needed"
Hey, that looks fairly short.
B
Bent77
Guest
It's not bad. Needs to help my buddy Aaron (he's the one that helped build the hi pinion) that's coming out. Need to regear the front axle on his M715 and mount 4 more mil surplus tires.
Think his needs a CB installed, but we have all the parts. Just need to do work, planning this Saturday
Think his needs a CB installed, but we have all the parts. Just need to do work, planning this Saturday
Last edited by a moderator:
What does a "rehear" of the front axle involve? 
Sand usually helps that.. Wears the teeth enough to change the ratios plus helps traction in snow!
Well played...
B
Bent77
Guest
Just means autocorrect can go **** itselfWhat does a "rehear" of the front axle involve?
B
Bent77
Guest
Steering box decided to start barfing oil out the sector shaft. Got it out, arm off and sector out. Didnt see anything amazing to make it pee.
Was to time to go service diapers instead. We'll see about the leak tomorrow
Was to time to go service diapers instead. We'll see about the leak tomorrow
When I got the new PSC box the end cap leaked out of the box. I figured all I could try was to replace the o-ring. Didn't see anything wrong with the one in the box but after I was done it didn't leak. Sometimes I think it just takes the smallest thing to cause a leak.
B
Bent77
Guest
Figured I'd run a flat file across the top of the box and make sure the threads are intact. One bolt didnt feel as tight as the others.
I dont have the pressure on the pump dimed, so shouldnt be the problem
I dont have the pressure on the pump dimed, so shouldnt be the problem
