My vote is here too. Ball socket fixed my leaking collector issue I was fighting for a few years.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Google search "mild steel v-band exhaust connectors" if you are worried about welding stainless. I vote for them. They work awesome on diesels with exh brakes that make a ton of backpressure.
https://www.aceraceparts.com/products/mild-steel-v-band-assembly-300-ms
https://www.aceraceparts.com/products/mild-steel-v-band-assembly-300-ms
FiTech
Last edited:
Factory Chevy gen 3...
Boring
It’s the 600 non power add system. I’ll shoot some more details in once parts start getting put together. On a bit of a forced work function at the moment
These are the v-bands I used:
https://www.summitracing.com/parts/SUM-694935
No problem so far. Was very nice to easily remove the y-pipe for the transmission work.
https://www.summitracing.com/parts/SUM-694935
No problem so far. Was very nice to easily remove the y-pipe for the transmission work.
There is no snow.. you lieee!!!
I see rust!!!!
https://www.sandersonheaders.com/sa...vy-header-set-for-chevelle-and-el-camino.html
ordered these in D port and angled plug. I didn't get the coated
They recommended against the center drop due to the cross member
ordered these in D port and angled plug. I didn't get the coated
They recommended against the center drop due to the cross member
http://www.lmctruck.com/icatalog/csb/full.aspx?Page=52
why not put blazer cover over the hole
why not put blazer cover over the hole
No, there is a cover that bolts to the floor to go over the filler tube.
