Um you forgot the back of it. What happens if you want to jump over rocks in reverse?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
B
Bent77
Guest
That lets the farts out
B
Bent77
Guest
Got the wiring rerouted up to the frame, ground wire terminated, checked diff oil, cut some turn down pipes and double checked some stuff with the sender.
Need to:
Build new pressure line to the existing filter
Replace filter
New return
Vent breather on tank
Weld turn downs
Check fluids
Load stuff
Need to:
Build new pressure line to the existing filter
Replace filter
New return
Vent breather on tank
Weld turn downs
Check fluids
Load stuff
Yay wheelin
B
Bent77
Guest
Yay hoping
Lots of hoping going to be going on this Friday in northern CO.......
That's what she said.
B
Bent77
Guest
Seems to be going around
B
Bent77
Guest
Dirty old man. Have a new door knob to polish?
B
Bent77
Guest
Don’t jinx us jerk
I would never do that, just wish I was going
B
Bent77
Guest
That would be cool
B
Bent77
Guest
Thanks. If i had to do it again, I'd do it a little different. Could have made the fitment a bit better and it hangs about an inch lower than it needs to clear the tank
But in the end, if it takes a rock the tank will live, and it doesnt hang down too much. So it'll work
B
Bent77
Guest
I hope that 3/16” plate is heavy enough to take a strike without collapsing. But if it does...
Can you imagine what that would weigh if it was made with 1/4"? There's a balance between bomb proof and practical I think. I figured the biggest thing a gas tank skid plate does is keep the tank from getting punctured. Dents suck but they are manageable. I've seen some pretty banged up tanks still getting rigs around on the trails.
B
Bent77
Guest
B
Bent77
Guest
Morning mini progress
Return
Vent
Turn downs all done
Return
Vent
Turn downs all done
