The Bent77 K10 now tow pig

[Justin V]

There is more to this story...


But did you die?

 

[Bent77]

Cam timing looks ok.
3 cylinders all came up 150 psi. Gonna check all I can get to without dropping the headers

 

[6872xtc]

So like eh!

Lol!

 

[Bent77]

Not quite. Was able to check 4 cylinders and easy. All at 152-156 psi included 7 which had the worst plug

 

[Bent77]

Did some hokey AF winching to get the truck into the garage after trying to sink a few anchor points failed. Not sure who puts rebar 4” from the edge of a slab

 

[Bent77]

Pulled the intake
@Fastereddie heres where the intake bolts go through. Could find pushrod with 1.25” or longer

 

[Bent77]

@Justin V gave me a goobered carb.
Harvesting the pivot off of it

 

[Bent77]

Not a huge fan of discussion when shit ain’t working.
Presuming the bottom end is ok, decided to proceed

 

[beags86]

Not a huge fan of discussion when shit ain’t working.
Presuming the bottom end is ok, decided to proceed

View attachment 288432

That's an Ugly 1406

 

[Bent77]

That's an Ugly 1406

All 1406s are ugly

 

[Capt Ron]

Did some hokey AF winching to get the truck into the garage after trying to sink a few anchor points failed. Not sure who puts rebar 4” from the edge of a slab

View attachment 288429

I'm sending a pm with my phone # . Call if you want some help next time. Remember I also own a tow truck.

 

[Bent77]

I'm sending a pm with my phone # . Call if you want some help next time. Remember I also own a tow truck.

I live waaay north.

I stood on the plate with the winch controller and prayed while the kid pretended he was steering and hoped not to roll backwards

It was kinda fun

 

[Capt Ron]

I live waaay north.

Yeah I know, distance is not a problem. Offer still stands.

 

[ktmoutfront]

I made a plate with a hitch tube on it. Four 1/2" diameter bolts into lag leads. Winch from the trailer is used to pull vehicles in.

 

[Bent77]

It would have been anchored properly had the rebar been in the right spot

Old house had it lagged to the monolith foundation

 

[Justin V]

You do realize most folks don't know what you're talking about....

 

[JoshHefnerX]

Well, at least the engine itself is good. You're hard-headed enough to get the tuning issue figured out.

 

[Bent77]

Well, at least the engine itself is good. You're hard-headed enough to get the tuning issue figured out.

We’ll get it

 

[max 02]

It would have been anchored properly had the rebar been in the right spot

Old house had it lagged to the monolith foundation

Winch point in the garage is a good idea... I’ve thought about it more than once. I’m lucky and just use our skid steer for the dead.

 

[nvrenuf]

I'm slow... you've been talking carbs, are you giving the efi another chance?