The Shop Truck

[r3dd0g]

I forgot to mention, the reason she was having trouble with the throttle is more because I need to re-do it. With the rubber floor and padding in, you have to shove the pedal pretty hard to get to 100%. I need to bend it up and put a nice positive adjustable stop on the floor so it works better/easier.

 

[Bent77]

We know she has a 24" inseem. GIve her a 4x4 block

 

[r3dd0g]

Every time her and Wade get together the Oompa Loompa song starts playing in my head.

 

[ktmoutfront]

Now my theme song is stuck in my head. Thanks.

 

[Babaganoosh]

You got a 15 out of a almost stock lq4? I thought my truck was fast and it just did a 16.7 with a chicken foot. Maybe it was the front end lifting a corner mid shift into 3rd.

 

[ktmoutfront]

ReTonkulous ran a 14.93 at 93 with a stock LT Gen V. 5500 pound windbreak. And I need a locker.

 

[r3dd0g]

You got a 15 out of a almost stock lq4? I thought my truck was fast and it just did a 16.7 with a chicken foot. Maybe it was the front end lifting a corner mid shift into 3rd.

I think it could do a high 14 with a little luck and good air. I still don't know how much it weighs...

 

[Babaganoosh]

Well the tcase, gears and tires don't help me but it isn't a drag truck. It's more fun in the dirt to run it hard anyway, the suspension makes it float not lift like the street does.

 

[r3dd0g]

Well the tcase, gears and tires don't help me but it isn't a drag truck. It's more fun in the dirt to run it hard anyway, the suspension makes it float not lift like the street does.

The crane and the 9x6' steel flatbed don't help me much either.

 

[r3dd0g]

Good news from the machine shop. They only needed to hone it out .001" which means I only need 1 new piston. They said the bore was a little tight before (.006" over piston size) and that they would recommend .008 over bore anyways with how much power I'm looking to make. They said that the tighter bore is likely why I damaged the one piston skirt.

 

[Babaganoosh]

So your saying it wasn’t machined properly the first time?

 

[ktmoutfront]

How come there aren't videos of Ambers' runs? Did she not show you how to take them?

 

[Bent77]

So your saying it wasn’t machined properly the first time?

Boost and nitrous applications need not only more ring, but preferably more pissed in the wall clearance just because of the heat

 

[Bent77]

Pissed in the wall. Voice to text is awesome.

 

[r3dd0g]

Outlaw usually does 6-8 thou overbore, mine was at 6 thou and they honed it 1 thou making the clearance 8 thou. Other than that, what Mark said. Needs more piss in the wall or something like that for Nitrous.

 

[Truckman4life]

Pissed in the wall. Voice to text is awesome.

Thought you were just illiterate or having a stroke maybe!

 

[Bent77]

Thought you were just illiterate or having a stroke maybe!

Both at once!

 

[r3dd0g]

How come there aren't videos of Ambers' runs? Did she not show you how to take them?

I was riding in it and giving instructions for the first 4, I do have one of the last, best run.
It's uploading right now, but should be available shortly.

 

[ktmoutfront]

@mrk5 we all need a sticker that says "I PISSED IN THE WALL"

 

[Bent77]