And lastly today's wonderful progress. There is a great resource here in town and he knows his stuff for auto wiring
We made a front vehicle harness, all connectors are double crimped, solderd and heat shrinked, then loomed with the fancy uv rated pain to install stuff and nice fancy plugs other than the fans that used 10 gauge and there own style connector and everything has its own wire color for its circuit.
Up front is wired as follows.
-rigid flood led light Dually d2's... orange wire
-rigid amber led 20 inch bar...blue w white stripe wire
-hella 55w heat lights..brown wire
-trans cooler fan... green with black stripe wire
-power steering cooler fan ...solid green wire
-radiator cooling fan...green with white stripe
With the front tackled we moved along to making a harness for the roof.
Up here we ran a 12 gauge wire off one of the extra fused circuits we left on the panel. This circuit will handle the following.
Cb with pa "inline fuse"
Siren/horn "inline fuse"
Race radio " inline fuse"
12v USB power to supply the Samsung tablet.
They are all wired with weatherpak plugs and the devices use a common stud ground then they also all have their own plug so they are easy to remove. These will mounted through a face panel to hide the stuff behind them and clean up the look.
Also up top in the 40 inch rigid led bar..yellow wire
Interior lights are the rigid led lights designed to mount on a tube, these are blue wired also with weatherpak plugs.
I'll snap some pics later of the awesome wiring to the battery, battery selector switch, distribution block "1 inwith 3 out"..battery cable selection is 0 gauge fine strand.
Line lock it also wired, as is the fuel pump and starter wires.