I still think you have WAY too many intake manifolds.
-G
-G
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The Willomet Charger
- Thread starter AgDieseler
- Start date
A desecration to Mopar nuts everywhere, this is my protouring, LS-powered, 1970 Dodge Charger; built at my shop, Willomet Motor & Fabrication.
I still think you have WAY too many intake manifolds.
-G
Is that even possible?
Went to the Pate Swap Meet, and walked out with a TR-6060 transmission.
This was pulled from a 2011 Camaro, so the gear ratios are right for the Charger. I wasn't looking for a 6060 since the shifter is something additional to engineer (compared to the T56 magnum), but this was too good of a deal to pass up.
First batch of chassis steel arrives tomorrow.
David
This was pulled from a 2011 Camaro, so the gear ratios are right for the Charger. I wasn't looking for a 6060 since the shifter is something additional to engineer (compared to the T56 magnum), but this was too good of a deal to pass up.
First batch of chassis steel arrives tomorrow.
David
Last edited:
Seems a little shifty to me...
Does the shifter end up too far back?
That's unlikely. I still have to place the powertrain in the car, and there is a lot of adjustment in the shift linkage. Also, I'm a tall guy, and the front buckets will be pushed back a little farther than normal.
David
based on how that linkage works, extending it back shouldn't be too hard.
PS- Thanks for moving it back, I'm tall ya know
PS- Thanks for moving it back, I'm tall ya know
Hell yeah!
Very Cool! Cant wait to see it when its all complete. Got some serious work ahead.
Tr6060 strength boost too.
The TR6060 is a sweet piece. Very fun to drive
Just the chassis buildout, body mods, suspension setup, build up the powertrain, and body work and paint.
And without the T56 magnum price tag! Supposedly the magnum has all the 6060 innards, but in the T56 case. Like I explained to the wife, I didn't save any money, I'll now just spend that elsewhere in the car.
My experience has been the same. Glad I got the one with the .57 OD. My CTS-V would cruise at unnecessarily high RPMs, and I have always referenced that experience when thinking about rear end and OD ratios. A three coast cruise requires a tall OD, and after a good shakedown, that will be one of the trips we take.
There's rain in the forecast for tomorrow, so I'll be in the shop with the doors closed; hopefully making progress.
David
That escalated quickly.
David
David
Got some serious weight loss program going on there!
Latest Posts
-
-
-
Crews and worthy rigs Around the country- Latest: fourwheelerjeff
-
