So when's the first drive around the block?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
If the driveshaft is done Friday it could be this weekend. Then I'll shred some rollers.
OH gnar!!! Shred the gnar!
Words of wisdom
Just remember to tighten down your negative cable from the thrash fest to Moab and not have to bum a few gallons of gas from a bum...@6872xtc
A loose negative terminal will be the last thing that stops this thing. Every damn wire has been checked multiple times with the EFI bugs I worked through.
I thought so to, funny thing is it would only do it coming off the trail not to and during...
5.13's in the 60
Ram is mocked up
Ram is mocked up
Got any more pics of the gear pattern it doesn't look right
I can take more pics when I take the cover off.
I debated on whether or not to say anything, and with what I have seen in the past you would probably be alright but I thought I would cause I don't wanna see you break gears. Rather they last forever
wetoolowdingbangow
1/2 ton status
Those Allen head screws on the diff cover are death. One wheeling trip and the only wrench that fits is the welder lol.
I paid a professional to install the gears, he's well known in the area. Critisism is welcomed.
Sorry dude, that is simply put not an acceptable pattern.
Pinion is too deep.
Here is acceptable stuff.
Here is too deep
With that sharp line on the bottom of the gear it's obvious.
Since those are front gears it will likely never be an issue. But the simple fact of the matter is those gears we're not set up properly
Pinion is too deep.
Here is acceptable stuff.
Here is too deep
With that sharp line on the bottom of the gear it's obvious.
Since those are front gears it will likely never be an issue. But the simple fact of the matter is those gears we're not set up properly
wetoolowdingbangow
1/2 ton status
Maybe the markings are a bit worn. Maybe repaint?
I really need a pic of the drive and coast.
But I wouldn't send a set of gears out like that
But I wouldn't send a set of gears out like that
Couple more photos of the other side of the gear.
Yukon gears BTW
Hoop mockup set with 6" of up travel
Watchyathink?
Watchyathink?
