CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Well that’s where I’m already going

Somebody buy this Sniper
 
I did see the Pro 4 doesn’t support a power adder (software revision, this changes later)
 
Last edited:
Lol.....I'm almost home. Pretty excited on what a marvelous day it's going to be.
Yes very marvelous. Going to replace the heater core so it stops spraying on the header

Pulling the heater hose in Moab obviously pissed it off
 
I knew pulling the hoses off in Moab was requiring too much force.

Those hoses and this core were replaced shortly after I got the truck in 1996

511373FE-396E-4C62-9998-F058C8C0739D.jpeg

AB11DCA8-8C1A-43FA-B8CC-582D000A4E58.jpeg
 
i ALWAYS cut the hoses on these older trucks . then split the nub length wise and roll it off the heater core . i dont yank them off unless i know there fresh new .
 
i ALWAYS cut the hoses on these older trucks . then split the nub length wise and roll it off the heater core . i dont yank them off unless i know there fresh new .
I did as much as possible. These were so seized on I had to use pliers to peel them, then a razor to clean up the tubes.

Wasn’t ideal
 
I drove a ‘67 Chevy pickup to high school. It was 19 years old and a dinosaur. Of course no ac and I joked that yeah is has power steering and power brakes..... all the power in my scrawny little body to steer it or stop it.
Now it’s been 27 years since the last square body left the lot. WTF!!!

49B01D60-79E2-44E6-A9AA-A2E58FCE90A0.jpeg
 

Latest Posts

Top Bottom