CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
The Daily Bushing sounds like an adult magazine....
Ba-zing!
Started pulling down the D60 tonight. The one upper kingpin I'd have no qualms with running,
But the other is less comforting...
Wonder what y'all say.
It should be noted that I have a daily driver and this would cost me more than parts...
I.e.; tools I don't have...
But the other is less comforting...
Wonder what y'all say.
It should be noted that I have a daily driver and this would cost me more than parts...
I.e.; tools I don't have...
I drilled a hole in a couple pieces of 1/4" scrap, welded them to the kingpins and they came right out with a 2lb hammer. My impact gun wouldn't touch them even after I heated them up bright red with the torch. I put the new ones back in mine with red loctite, an old long lug nut of the right size, and a 1/2" drive impact gun. Worked out good for me.
I’ll wait for the experts to say.
You watched that youtube video too?
I’d polish both and run them.
WFO sells weld on tabs if you go that direction.
Good excuse
