CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Plan is to find/modify hubs on the 60, then gut the 14 for parts.

My current 14 already has shock mounts modified, and the new 14 is a cab and chassis model anyway
 
Probably a hard sell on that other 14, but that gear will do good with the OD
 
Sweet man gears.
And man axles.
FI tech fuel injection.
This build is finally exciting.
:popcorn:
 
Are you going to go through the axle first?
I'd probably go through the king pins for sure
The deal was 1200 for the pair...

I walked up expecting a SRW set...

Immediately seeing the dually hubs, I explained that I was under the impression from his ad that they were from a single wheel truck and said sorry but I have to pass, 1200 was just too much for a dually set...


He started with the make me an offer thing...


I delayed for a few minutes, chatting him up for a minute, then finally said, look, these axles aren't what I really need, and I'm not trying to insult you, but I'm looking at 700 to walk away with these...
(Low, hoping for the best on my end)


After some countering, and my repeated rejections of his offers, 1100, 1050, 1000, nope.

I said 800.

He said that he had a standing offer for 8 on any d60 he came across from another guy. He wasn't going to go less than a grand for the pair...

Thanks man, good luck. Turned and started walking...


950 he hollers.

850 counter...


900...


Deal.
 
If you were close I would trade you straight across. I can't find recentered H1 for a reasonable cost. But alas, you are far away.
 
Approx 4 inches narrower than a standard srw 14ff, wms to wms.
 
I also think I found my issue from before...

No one better tell my wife that I spent 1200 times what the cost of the problem was...
 

Latest Posts

Top Bottom