CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
I fk'n HATE spiders
Cleaned a bunch of junk out of the IAC, replaced all of the vacuum plugs and a new PCV. Acts more appropriate, but will be checking it.
Unloaded the HP into the garage and got it up in stands to start the disassembly
Unloaded the HP into the garage and got it up in stands to start the disassembly
At least spiders have a visible means of moving about. Snakes move unnaturally. Something just not right there.... 
So, couple minor things.
Dropping RPM still on deceleration, tries to die before catching itself. Put a volt meter on the TPS, running .555VDC at closed throttle position, 3.5 VDC WOT. If you drop the butterflies shut, it drops to ~.4 VDC before returning to .55. Think i have a bad TPS. Adjusted the idle screw just enough to move it off that spot, and will drive out tomorrow.
Sounds like my Steinway™ sliders have shipped. Guess I'll beat the rockers back out!
Dropping RPM still on deceleration, tries to die before catching itself. Put a volt meter on the TPS, running .555VDC at closed throttle position, 3.5 VDC WOT. If you drop the butterflies shut, it drops to ~.4 VDC before returning to .55. Think i have a bad TPS. Adjusted the idle screw just enough to move it off that spot, and will drive out tomorrow.
Sounds like my Steinway™ sliders have shipped. Guess I'll beat the rockers back out!
Sweet hammer.
Rust is no Bueno..
I have a '77 too. I know that hammer, and the 5# pile of rust flakes and dirt next to it.
Take more pics, im interested in how your getting it done and how well it will work.
No one loves a reg cab long bed so we need to stick together!
No one loves a reg cab long bed so we need to stick together!
