CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Yank Tank Molotov/3+3, 454/magnum/Allison
- Thread starter SpeedlabDan
- Start date
'84 K30 Silverado "big Dooley"
the moduel thingy is delay wiper unit .
and the wipers coming on or not parking by them self could be the same problem i just fixed in my thread in the garage . post #10 in here https://ck5.com/forums/threads/few-under-dash-wire-problem-questions.335539/
and the wipers coming on or not parking by them self could be the same problem i just fixed in my thread in the garage . post #10 in here https://ck5.com/forums/threads/few-under-dash-wire-problem-questions.335539/
It's a Dorman so who knows lol, it is pictured in a tan case so it's definitely not stock
Thanks man she's getting there!
Yea mine park fine but once in a while they'll come on for three sweeps or so haha Ive been Keepin tabs on your build
3 sweeps at a time could be the switch making contact internally through the the washer function...
My truck would occasionally blow through an entire washer bottle with wipers running the whole time and I couldn't do a damn thing about it except there and laugh...
Different wiper switch and problem is gone...
My truck would occasionally blow through an entire washer bottle with wipers running the whole time and I couldn't do a damn thing about it except there and laugh...
Different wiper switch and problem is gone...
Hmm that makes me wonder if it has something to do with my washer pump not working. That would be sweet and I wouldn't be surprised by the looks of the wiring I had to replace. Hope to get out there tomorrow
Love the instrument cluster. :drool:
The color combos are pretty cool I would like to hook the dimmer up to the light switch bc it's pretty bright with the leds at night!
@nvrenuf here is another style / company for you . ......... not saying DROOLY'S unit is not nice .
http://newvintageusallc.mybigcommerce.com/gm-truck-73-87/
http://newvintageusallc.mybigcommerce.com/gm-truck-73-87/
Agreed the dakota unit is not cheap.
Definitely cool stuff from both companies but they’ll be a ways down my to-do list.
Ok update, finally squirreled enough time to pull off the conversion of the 24-158848 bilstien 5100 damper on my stock Dana 60. It took some persuasion to get the old spacer and shaft of the new unit. Had to grind the head off the washer and press both out. The old stabilizer that may be just a shock in not sure only had a long spacer on the tie side and a stock shoulder bolt mount on the axle. They came right out. Pressed the new shoulder bolt into the one end after drilling the rubber bushing out to 9/16". Used what new washers I had and made a spacer to go over the sleeve on the tie side. (I know it's not like me not to replace all hardware but I'm trying to break my OCD) I still have full sweep after a test but I haven't driven it yet for a report on the road manners. I'm sure it'll be good
More gooder. More better. Also did the driver side bearings and races. Inner was the surface of the moon. Felt it when I did the front calipers. Passenger side and fill up tomorrow. Also put the new nsbu switch on the trans but it needs to be cleared and that won't happen till this weekend.
So it runs much better without the vacuum leak from the hvac... 
I also suspect the fuel guage needs calibration since 2.5 gallons in three blocks is obsurd. Have to drain it to set empty and custom set it.
I also suspect the fuel guage needs calibration since 2.5 gallons in three blocks is obsurd. Have to drain it to set empty and custom set it.
I told you that pig was gonna be thirsty!
Haha 40 miles to the tank is something of fiction! Once I get the trans strait I can run it out and calibrate it thru the dash
All joking aside. The truck is looking great. Can’t wait to see it at BB19
Edit: Just the same though you might want to check out this site.
https://www.attatank.com/
I put one of these in my Ram and love it.
Edit: Just the same though you might want to check out this site.
https://www.attatank.com/
I put one of these in my Ram and love it.
Hahaha we'll see if I can afford to fuel it to get there lol
Drooley is shifting through all 5 gears and not showing any trouble codes! Turns out the nsbu switch was missing a ground and ignition source to the 7 pin I was told was outgoing signal only! Check your schematics kids.
